Anti-moss copper roof tape
Copper roof cleaning anti moss tape 15cm x 5m
Copper is really effective against moss, lichens and algae.
This is thanks to the CU 2+ ions, which the copper releases over time.
Air and water that has contact with the copper tape will oxidize and release the copper ions which are harmful to moss, algae and lichens.
All this is a natural process that is 100% eco-friendly.
These goods are dispatched on the next working day (or two working days in rare occasion).
Delivery within the UK is done by using 48 hours delivery service.
The back of the tape is fully coated with butyl adhesive which is self adhesive.
This allows the tape to adapt to the shape of the bricks.
Installation
This is because there is a better flow of rainwater on the side of the roof compared to the ridge that only receives the water that falls directly onto it.
The recommended temperature during the installation is 5 degrees Celsius or higher as butyl adhesive will be less effective when used on a cold day.
How does it work?
Product description:
Moss Tape is a honeycomb pattern, which when pressed on the surface, allows you to shape the tape in all directions freely and easily. Thanks to this technology, the flexibility of copper is comparable to that of lead tapes.
The adhesive layer is made of butyl, which is characterized by high viscosity and adhesion to the surface.
Roll length 5000mm (5 meters), width 150mm.
Application:
After some time, atmospheric conditions make the tiles an ideal place for moss or other lichens. This process although very slow is harmful to the roof. During the rooting of these tiny organisms small, microscopic cracks are formed.
The roof loses its durability and aesthetic value. Moss and lichen cause the water to not flow freely from the roof. This has a negative impact on the tiles and on the functioning of the entire roof structure.
Chemical properties of copper:
On the top, copper forms a natural protective layer (patina) composed of alkaline copper salts such as copper carbonate, copper sulfate or, near the sea, copper chloride, which protect the metal very well against the aggressive effects of the atmosphere.
The colour of the protective layer changes with time - from red-brown, through dark brown to green. The speed of patina formation depends on certain conditions (air composition, humidity, and dust in the air).
It varies from 4 years in marine conditions, 8 years in industrial conditions, 15 years in urban conditions and even 30 years in rural conditions.
Erosion of the protective coating of copper:
The average erosion rate of the protective coating depends on weathering conditions and is about 0.8 µm in marine conditions, about 2.0 µm in industrial conditions, about 0.8 µm in urban conditions, and about 0.4 µm in rural conditions.
Desired action:
Erosion of the protective coating occurs due to chemical reactions and thermal movement of the metal sheet. During these processes, copper salts (copper carbonate, copper sulfate, and copper chloride) are washed away by rain and settle on the elements below the copper line.
This product is highly rated in other market places such as Amazon.
Item Thickness | |
Approx 0.8mm | The thickness of one roll is approximately 0.8mm |
Item Width | |
15 cm | The width of one roll is 15cm |
Material | |
Copper | This product is made our of Copper with the back of the tape is fully coated with butyl adhesive which is self adhesive. |
Item Length | |
5 meters | The total length of 1 roll is 5 meters. |