Easy-to-fit lightweight coving in plaster coating

The design of our products makes it very easy to install or refurbish as well as add LED lighting & downlights/spotlights
Made from very strong EPS polystyrene with a plaster coating that gives the coving that stylish look while making it much more durable.

• Because of the temperatures downlights should be fitted ONLY with LED bulbs or with special light-bulbs that emit low temperatures.
• Product does NOT come with already made holes for downlights. Customer must make the holes (with hole saw for example) for downlights yourself in preferred locations.
• High density and easy-to-fit lightweight coving that provides a perfect, exceptional finish
• The products are easy for cutting by knife or by saw using a mitre box, manual or electric mitre saw
• Adds a great aesthetic to the room
• Easy and quick installation by one person, no screws or nails required
• ONLY solvent free adhesive can be used for installation and fixing (available in any DIY shop)
• Any gaps can be filled with acrylic caulk or filler
• Coving is suitable for sanding with high grit (+120 grit) sandpaper
• Ready to paint finish using water-based paint (2-3 coats are normally sufficient)
• This product is water-resistant and fire retardant
• Water and humidity resistant which makes them suitable for installation in kitchens and bathrooms as well as any other room indoor
• Durable and shock-resistant
• Downlights & LED lights are not included
• Supplied in lengths of 2 meters

Corners

We supply pre-cut mitred corners to ease and simplify installation. Just fix the corner in place and butt joint the length of coving to the corner.

Every corner comes in a pair of 2 pieces where each piece is approx. 20cm long and cut at a 45-degree angle. 

We are offering internal (going inwards) and external (going outwards) corners.

We are capable of creating our products in any dimension on a special request.
Contact us for more info!