Product Code: FL05
Availability: In Stock
XPS COVING LED Lighting cornice - FL5
£18.52
Ex Tax: £15.43
Qty
Easy-to-fit lightweight coving
The design of our products makes it very easy to install or refurbish as well as add LED lighting
Made from very strong XPS polystyrene
- The products are easy for cutting by knife or by saw using a mitre box, manual or electric mitre saw
- Adds a great aesthetic to the room
- Easy and quick installation by one person, no screws or nails required
- ONLY solvent free adhesive can be used for installation and fixing (available in any DIY shop)
- Any gaps can be filled with acrylic caulk or filler
- Coving is suitable for sanding with high grit (+120 grit) sandpaper
- Ready to paint finish using water-based paint (2-3 coats are normally sufficient)
- This product is water-resistant and fire retardant
- Water and humidity resistant which makes them suitable for installation in kitchens and bathrooms as well as any other room indoor
- Durable and shock-resistant
- LED lights are not included
- Supplied in lengths of 2 meters
We supply pre-cut mitred corners to ease and simplify installation. Just fix the corner in place and butt joint the length of coving to the corner.
Every corner comes in a pair of 2 pieces where each piece is approx. 20cm long and cut at a 45-degree angle.
We are offering internal (going inwards) and external (going outwards) corners.
Every corner comes in a pair of 2 pieces where each piece is approx. 20cm long and cut at a 45-degree angle.
We are offering internal (going inwards) and external (going outwards) corners.
We are capable of creating our products in any dimension on a special request.
Contact us for more info!
Model | |
FL5 | Standard FL1 range |
Material | |
XPS polystyrene | Lightweight XPS durable polystyrene. This material is easy to cut even with regular snap-off knife. |
Colour | |
White | Product colour is white, designed to be painted with water-based paint |
Item Length | |
2 Meters (± 1%) | Total length of each coving is 2 meters (± 1%). Easy to cut and join during the installation. |